UltraTech 1125 IBC Spill Pallets-ModularIBC Spill Pallets-Modular

Quantity

Overview

Modular Models Meet EPA regulations with low-cost spill containment for multiple IBC tanks Storing multiple IBCs, totes or tanks can take up a lot of room, and a lot of money. But with the Modular IBC Spill Pallets, it can take up less of both. By connecting the containment sumps and sharing walls, these units offer an economical solution that takes up a relatively small amount of space.

Features

Each IBC tank sits on a heavy-duty spill pallet with a capacity of 9,000 lbs UDL.
Each of the low profile spill pallets has a containment capacity of 75-gallons and measures 62" x 62" x 8.75”H.
Any number of the modular spill pallets can be connected together with bulkhead fittings. Two (2) bulkhead fittings are used to connect one pallet to the next.
To increase containment capacity, a 65-gallon capacity Expansion Tank is available.
"Flow-through" bulkhead fittings (1.25-inch diameter) are used to connect spill pallets and Expansion Tanks together.
Bulkhead fittings allow spills to be channeled throughout the containment system, thereby "borrowing" containment capacity from adjacent spill pallets and Expansion Tanks.
Constructed of 100% polyethylene, eliminating the potential for rust and corrosion. They offer excellent chemical resistance to a broad range of chemicals including acids, solvents, and oils.

Technical Information

This item's country of origin is United States.

Each of the low profile spill pallets has a containment capacity of 75-gallons and measures 62" x 62" x 8.75”H.

To increase containment capacity, a 65-gallon capacity Expansion Tank is available.

"Flow-through" bulkhead fittings (1.25-inch diameter) are used to connect spill pallets and Expansion Tanks together.

Standard offerings include 2-tank, 3-tank, 4-tank, and 5-tank models. In addition, components may be purchased separately to allow users to "build-your-own" configurations for indoor models.

Connecting an Expansion Tank to a spill pallet also requires two (2) bulkhead fittings.

Bulkhead fittings are included with each 2-, 3-, 4-, or 5-tank model.

Once five (5) or more spill pallets are connected together, the total containment capacity is 375 gallons minimum and does not require the use of an Expansion Tank to meet the spill containment regulations.

Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.

Protected by the industry’s strongest warranty - Five (5) years against any material or workmanship defects.

WARNING: This product (Assembly Kit - Part# 1118) can expose you to chemicals including nickel, which is known to the State of California to cause cancer.

Manufacturer

Browse all UltraTech

Similar

New

Recommended

You Recently Viewed

Need Help?